FEATURES OF USING
ARMFLEX FLEXIBLE RUBBER JOINTS
1.ABSORBS VIBRATION , NOISE AND SHOCK
Sound, travelling axially
through ARMFLEX Joins, is stopped at once. Water hammer, pumping
impulses and water born noises are absorbed by the molded light-weight
2.EASY TO INSTALL,
EASY TO REMOVE
Loose flanges, no need of gasket or packing, and elastic spherical body make
the joint easy to install
3.SECURITY ASSURED IN USAGE
carcass endables its body, when
subjected to high pressure and expansion, not
contacting with the connecting bolt head. Thus, the joint may be used in a sense
of damage proof and
4.HIGHER BURST STRENGTH
is stronger than cylindrical shape or other configuration. Thus under
ARMFLEX Joint is 4 times as strong as a cylindrical joint.
Additionally, our products are made of best
suitable material,and hence
their burst pressure is much higher than those of other makes.
5.SUITABLE FOR SUCTION AND DELIVERY
Owning to its excellant molding technique with its tough chemical fiber, ARMFLEX
satisfactorily withstand the suction and discharge. Vacuum rating can stand up to 750mm
Joints has streamlined, flowing arch to reduce turbulence, sediment
build-up, thrust area
and the effects of thrust on the piping system equipment.
7.LOW DEFORMATION UNDER PRESSURE
is exerted in all directions distributing forces evenly over a large area.
deformation of ARMFLEX Joint due to pressure is much
lower than that of other makers.
8.LIGHT AND COMPACT
required for the installation of ARMFLEX Joint is about half of the
requirement of cylindrical.
Weight is about one third.
9.GREATER MOVEMENTS ARE AVAILABLE
and elongation, deflection and angular movements will be greater.
10.WIDE SERVICE RANGE
Made with chemical resistant elastomers such as Neoprene, Nitrile, Hypalong.
product compatible with the fluid being pumped or piped. Operate up to 16KG and
-20¢XC to 100¢XC.